Garmin G1000 Diamond DA62 Pilot's Manual page 591

Integrated avionics system
Table of Contents

Advertisement

Message Advisory
AHRS1 GPS – AHRS1 operating
exclusively in no-GPS mode.
AHRS1 SRVC – AHRS1 Magnetic-field
model needs update.
GEO LIMITS – AHRS1 too far North/
South, no magnetic compass.
MANIFEST – GRS1 software
mismatch, communication halted.
GDL 69/69A SATELLITE DATALINK RECEIVER
Message Advisory
GDL69 CONFIG – GDL 69 config
error. Config service req'd.
GDL69 FAIL – GDL 69 has failed.
MANIFEST – GDL software mismatch,
communication halted.
GTX 33/33ES TRANSPONDER
Message Advisory
XPDR1 CONFIG – XPDR1 config error.
Config service req'd.
MANIFEST – GTX1 software
mismatch, communication halted.
XPDR1 SRVC – XPDR1 needs service.
Return unit for repair.
XPDR1 FAIL – XPDR1 is inoperative.
GDC 74A AIR DATA COMPUTER
Message Advisory
MANIFEST – GDC1 software
mismatch, communication halted.
ADC1 ALT EC – ADC1 altitude error
correction is unavailable.
ADC1 AS EC – ADC1 airspeed error
correction is unavailable.
190-01895-00 Rev. A
Comments
The #1 AHRS is operating exclusively in no-GPS mode. The G1000 system should be
serviced.
The #1 AHRS earth magnetic field model is out of date. Update magnetic field model
when practical.
The aircraft is outside geographical limits for approved AHRS operation. Heading is
flagged as invalid.
The #1 AHRS has incorrect software installed. The G1000 system should be serviced.
Comments
GDL 69 configuration settings do not match those of backup configuration memory.
The G1000 system should be serviced.
A failure has been detected in the GDL 69. The receiver is unavailable. The G1000
system should be serviced.
The GDL 69 has incorrect software installed. The G1000 system should be serviced.
Comments
The transponder configuration settings do not match those of backup configuration
memory. The G1000 system should be serviced.
The transponder has incorrect software installed. The G1000 system should be
serviced.
The #1 transponder should be serviced when possible.
There is no communication with the #1 transponder.
Comments
The GDC 74A has incorrect software installed. The G1000 system should be serviced.
GDC1 is reporting that the altitude error correction is unavailable.
GDC1 is reporting that the airspeed error correction is unavailable.
Garmin G1000 Pilot's Guide for the Diamond DA62
APPENDIX A
577

Advertisement

Table of Contents
loading

Table of Contents