Garmin G1000 Diamond DA62 Pilot's Manual page 273

FLIGHT MANAGEMENT
l) V4 is now loaded into the flight plan as shown in Figure 5-120.
Figure 5-120 V4 is Loaded in the Flight Plan
5) Making V4 the active leg of the flight plan.
a) Press the FMS Knob to activate the cursor.
b) Turn the large FMS Knob to highlight SLN. The TO waypoint of the leg is selected in order to activate the leg.
c) Select the ACT LEG Softkey. The confirmation window is now displayed as in Figure 5-121. Note the TOP to
SLN leg is actually part of V4.
Figure 5-121 Comfirm Active Leg
190-01895-00 Rev. A Garmin G1000 Pilot's Guide for the Diamond DA62 259