Table of Contents
Advertisement
HAZARD AVOIDANCE
4) Use the FMS Knob or the ENT Key to scroll through the METAR and TAF text. METAR text must be completely
scrolled through before scrolling through the TAF text.
5) Press the FMS Knob or the CLR Key to return to the Weather Data Link (XM) Page.
Or :
1) Select the Weather Information Page.
a) Turn the large FMS Knob to select the Waypoint Page Group.
b) Press the WX Softkey to select the Weather Information Page.
2) Press the FMS Knob to display the cursor.
3) Use the FMS Knob to enter the desired airport and press the ENT Key.
4) Use the FMS Knob or the ENT Key to scroll through the METAR and TAF text. Note that the METAR text must
be completely scrolled through before scrolling through the TAF text.
METAR Symbol
Original METAR text is also accessible while panning the map cursor over a METAR flag on any map page
on which a METAR is displayed. The METAR text is shown in a box near the METAR flag.
In addition, METAR flags and their associated text are displayed on the Active Flight Plan Page on the MF.D.
A METAR flag is shown next to waypoint(s) in the flight plan with an available METAR.
Displaying original METAR text on the Active Flight Plan Page:
1) Select the Active Flight Plan Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired waypoint. The METAR text will appear in the 'SELECTED
WAYPOINT WEATHER' window below.
4) When finished, press the FMS Knob to remove the cursor or press the FPL Key to exit the Active Flight Plan
Page.
306
Figure 6-26 METAR and TAF Text on the Weather Information Page
Garmin G1000 Pilot's Guide for the Diamond DA62
METAR data for the
Selected Airport
TAF Text for the
Selected Airport
190-00-01895-00 Rev. A
Advertisement
Table of Contents
Troubleshooting
