Table of Contents
Advertisement
8) With 'CREATE' highlighted, press the ENT Key to create the profile
Or :
Use the large FMS Knob to select 'CREATE and ACTIVATE' and press the ENT Key to activate the new profile.
9) To cancel the process, select 'CANCEL' with the large FMS Knob and press the ENT Key.
Sel ecting an active profile:
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the active profile field in the Pilot Profile Box.
4) Turn the small FMS Knob to display the pilot profile list and highlight the desired profile.
5) Press the ENT Key. The G1000 loads and displays the system settings for the selected profile.
Renaming a profile:
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight 'RENAME' in the Pilot Profile Box.
4) Press the ENT Key.
5) In the 'Rename Profile' window, turn the FMS Knob to select the profile to rename.
6) Press the ENT Key.
7) Use the FMS Knob to enter a new profile name up to 16 characters long and press the ENT Key.
8) With 'RENAME' highlighted, press the ENT Key.
9) To cancel the process, use the large FMS Knob to select 'CANCEL' and press the ENT Key.
Deleting a profile:
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight 'DELETE' in the Pilot Profile Box.
4) Press the ENT Key.
5) In the 'Delete Profile' window, turn the FMS Knob to select the profile to delete.
6) Press the ENT Key.
7) With 'DELETE' highlighted, press the ENT Key.
8) To cancel the process, use the large FMS Knob to select 'CANCEL' and press the ENT Key.
190-01895-00 Rev. A
Garmin G1000 Pilot's Guide for the Diamond DA62
SYSTEM OVERVIEW
37
Advertisement
Table of Contents
Troubleshooting
