Garmin G1000 Diamond DA62 Pilot's Manual page 553

a) Press the MENU Key to display the Page Menu.
b) Turn either FMS Knob to place the cursor on 'Draft New Predefined Message'.
c) Press the ENT Key. The PREDEFINED SMS TEXT MESSAGE Window is now displayed as shown in Figure 8‑94.
5) The cursor is displayed in the 'TITLE' field. Enter the desired message title. Entry can be accomplished through
the alphanumeric keys on the MFD Controller, or combination of the FMS Knob on the controller and softkeys
on the MFD. The FMS Knob is used to enter letters and numbers, or numbers can be entered from the MFD
by selecting the NUMBERS Softkey. Press the CAP LOCK Softkey to create upper and lower case alpha
characters. Special characters can be accessed by selecting the SYMBOLS Softkey.
6) Press the ENT Key. The cursor is now displayed in the 'MESSAGE' field.
7) Enter the desired message using any combination of entry methods as described in step 5.
8) Press the ENT Key.
9) Press the SAVE Softkey. The new predefined message is now shown in the displayed list. Selecting the
CANCEL Softkey will delete the message without saving.
10) Press the MENU Key to display the Page Menu.
11) Turn either FMS Knob to place the cursor on 'Stop Editing Predefined Message'.
12) Press the ENT Key.
190-01895-00 Rev. A
Figure 8-94 Composing a Predefined Message
Garmin G1000 Pilot's Guide for the Diamond DA62
ADDITIONAL FEATURES
539