Garmin G1000 Diamond DA62 Pilot's Manual page 358

HAZARD AVOIDANCE
Enabling/disabling profile view (containing winds aloft data)
1) Select the Navigation Map Page.
2) Press the PROFILE Softkey.
Or:
1) Press the MENU Key.
2) Turn the large FMS Knob to highlight 'Show Profile View' or 'Hide Profile View' (choice dependent on current
state) and press the ENT Key.
Winds Aloft data inside the Profile View is enabled by default when the Profile View is displayed on the
Navigation Map Page. This behavior can be changed on the Navigation Map Page.
Enabling/disabling winds aloft data display in Profile View:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With Map Setup highlighted, press the ENT Key (Figure 6-84).
4) Turn the small FMS Knob to select the Profile Group and press the ENT Key (Figure 6-85).
5) Turn the large FMS Knob to select 'Profile Winds' (Figure 6-86).
6) Turn the small FMS Knob to select 'On' or 'Off'.
7) Press the FMS Knob or CLR Key to return to the Navigation Map Page with the changed settings.
Figure 6-84 Navigation Map Page Menu
Figure 6-85 Navigation Map Page Setup Menu
344
Figure 6-86 Navigation Map Page Setup Menu, Weather Group
Garmin G1000 Pilot's Guide for the Diamond DA62
190-00-01895-00 Rev. A