Garmin G1000 Diamond DA62 Pilot's Manual page 375

Displaying weather on the Weather Radar Page:
1) Select the Weather Radar Page in the Map Page Group with the FMS Knob.
2) Press the MODE Softkey.
3) While on the ground, press the STANDBY Softkey, and the radar enters the Standby Mode.
a )
b )
Or :
If the aircraft is airborne, press the WEATHER Softkey. The radar begins transmitting.
4) Turn the Joystick to select the desired map range.
5) The horizontal scan is initially displayed (Figure 6-107). If desired, press the VERTICAL Softkey to change to
vertical scanning.
190-01895-00 Rev. A
Press the WEATHER Softkey. A confirmation window is displayed.
Figure 6-106 Confirming Activating Radar
Turn the small FMS Knob to highlight YES and press the ENT Key to continue radar activation.
Garmin G1000 Pilot's Guide for the Diamond DA62
HAZARD AVOIDANCE
361