Garmin G1000 Diamond DA62 Pilot's Manual page 213

5) Turn the FMS Knob to select the desired airway from the list, and press the ENT Key. Low altitude airways are
shown first in the list, followed by "all" altitude airways, and then high altitude airways.
6) Turn the FMS Knob to select the desired airway exit point from the list, and press the ENT Key. 'LOAD?' is
highlighted.
7) Press the ENT Key. The system returns to editing the flight plan with the new airway inserted.
Selected Airway
Preview of
Selected Airway
Selected Airway Exit
Point
190-01895-00 Rev. A
Figure 5-65 Select Airway Page - Selecting Exit Point
Figure 5-66 Active Flight Plan Page - Airway Inserted
Garmin G1000 Pilot's Guide for the Diamond DA62
FLIGHT MANAGEMENT
Airway Entry Waypoint
Selected Exit Point
Airway Exit Points
Available
Inserted Airway Header
- Airway Identifier: [airway
identifier].[exit waypoint identifier]
(e.g., V4.SLN)
199