Garmin G1000 Diamond DA62 Pilot's Manual page 452

AUTOMATIC FLIGHT CONTROL SYSTEM
CHANGING THE SELECTED COURSE
The Selected Course is controlled using the CRS Knob (while in VOR, LOC, or OBS Mode). Pressing the
CWS Button and hand-flying the aircraft does not change the Selected Course while in Navigation Mode.
The autopilot guides the aircraft back to the Selected Course (or GPS flight plan) when the CWS Button is
released.
GPS is Selected
Navigation Source
438
GPS Navigation
Mode Active
Selected
Navigation Course
Source
Figure 7-24 Navigation Mode
Backcourse
Mode Active
LOC2 is Selected
Figure 7-25 Backcourse Mode
Garmin G1000 Pilot's Guide for the Diamond DA62
Pitch Hold
Mode Active
Command Bars Indicate Left Turn
to Track GPS Course and Climb
to Intercept Selected Altitude
Pitch Hold
Mode Active
Command Bars Hold Pitch Attitude
190-01895-00 Rev. A