Table of Contents
Advertisement
ADDITIONAL FEATURES
Sending a predefined text message:
1) While viewing the AUX‑TEXT MESSAGING Page, select the NEW Softkey.
2) The TEXT MESSAGE DRAFT Window is now displayed with the cursor in the 'TO' field. Enter the desired
telephone number or email address. Entry can be accomplished through a combination of the FMS Knob on
the controller and softkeys on the MFD. The FMS Knob is used to enter letters and numbers, or numbers can be
entered from the MFD by selecting the NUMBERS Softkey. Select the CAP LOCK Softkey to create upper and
lower case alpha characters. Special characters can be accessed by selecting the SYMBOLS Softkey.
3) Press the ENT Key. The cursor is now displayed in the 'MESSAGE' field (Figure 8‑95).
4) Press the PREDEFD Softkey. The PREDEFINED MESSAGE MENU Window is displayed as seen in Figure 8‑96.
540
Figure 8-95 Composing a New Text Message
Figure 8-96 Predefined Message List
Garmin G1000 Pilot's Guide for the Diamond DA62
190-01895-00 Rev. A
Advertisement
Table of Contents
Troubleshooting
