Garmin G1000 Diamond DA62 Pilot's Manual page 202

FLIGHT MANAGEMENT
4) Press the Direct-to Key to display the Direct-to Window with the selected point entered as the direct-to
destination.
5) Press the ENT Key. The cursor is now displayed on 'ACTIVATE?'.
6) Press the ENT Key again to activate the direct-to.
Cancelling a Direct-to:
1) Press the Direct-to Key to display the Direct-to Window.
2) Press the MENU Key.
3) With 'Cancel Direct-To NAV' highlighted, press the ENT Key. If a flight plan is still active, the G1000 resumes
navigating the flight plan along the closest leg.
When navigating a direct-to, the G1000 sets a direct great circle course to the selected destination. The course
to a destination can also be manually selected using the course field ('COURSE') on the Direct-to Window.
Selecting a manual direct-to course:
1) Press the Direct-to Key. The Direct-to Window is displayed with the destination field highlighted.
2) Highlight the course field.
3) Enter the desired course.
4) Press the ENT Key. The cursor is now displayed on 'ACTIVATE?'.
5) Press the ENT Key again to activate the direct-to.
Reselecting the direct course from the current position:
1) Press the Direct-to Key. The Direct-to Window is displayed with the destination field highlighted.
2) Press the ENT Key. The cursor is now displayed on 'ACTIVATE?'.
3) Press the ENT Key again to activate the direct-to.
188
Figure 5-54 Direct-to Window - Cancelling Direct-to Navigation
Garmin G1000 Pilot's Guide for the Diamond DA62
Page Menu
- Cancel Direct-To
Navigation
190-01895-00 Rev. A