Table of Contents
Advertisement
Loading a departure into the active flight plan from the Departure Information Page:
1) From the Airport Information Page (first page in the WPT group), press the DP Softkey. The Departure Information
Page is displayed, defaulting to the airport displayed on the Airport information Page.
2) To select another airport, press the FMS Knob to activate the cursor, enter an identifier/facility name/city, and
press the ENT Key.
3) Select a different departure, if desired.
a) Turn the large FMS Knob to highlight the Departure. The departure is previewed on the map.
b) Turn the small FMS Knob to view the available departures. Press the ENT Key to select the departure. The cursor
moves to the Runway box. The departure is previewed on the map.
c) Turn the small FMS Knob to view the available runways. Press the ENT Key to select the runway. The cursor
moves to the Transition box (only if there are available transitions). The departure is previewed on the map.
d) Turn the small FMS Knob to view the available transitions. Press the ENT Key to select the transition. The cursor
moves to the Sequence box. The departure is previewed on the map.
4) Press the MENU Key to display the Departure Information Page Menu.
5) Turn the FMS Knob to highlight 'Load Departure'.
6) Press the ENT Key to load the departure procedure into the active flight plan.
REMOVING A DEPARTURE FROM THE ACTIVE FLIGHT PLAN
When plans change while flying IFR, departures can be easily removed from the Active Flight Plan.
Removing a departure procedure from the active flight plan:
1) Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD).
2) Press the MENU Key, and highlight 'Remove Departure'.
3) Press the ENT Key. A confirmation window is displayed listing the departure procedure.
4) With 'OK' highlighted, press the ENT Key. To cancel the removal request, highlight 'CANCEL' and press the ENT
Key.
Or :
1) Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD).
2) Press the FMS Knob, and turn to highlight the departure header in the active flight plan.
3) Press the CLR Key. A confirmation window is displayed listing the departure procedure.
4) With 'OK' highlighted, press the ENT Key. To cancel the removal request, highlight 'CANCEL' and press the ENT
Key.
5) Press the FMS Knob to remove the flashing cursor.
190-01895-00 Rev. A
Garmin G1000 Pilot's Guide for the Diamond DA62
FLIGHT MANAGEMENT
235
Advertisement
Table of Contents
Troubleshooting
