Garmin G1000 Diamond DA62 Pilot's Manual page 544

ADDITIONAL FEATURES
INCOMING CALLS
Outside callers should dial 00 + 8816 or 8817 + aircraft phone number when calling the aircraft
NOTE:
Iridium Telephone System.
When a phone call is received while viewing MFD pages other than the AUX-TELEPHONE Page, a pop-
up alert similar to Figure 8-83 is displayed, accompanied by a ringtone heard on the selected cockpit audio.
The pop-up alert may be inhibited at times, such as during takeoff. In addition to the pop-up alert, a ringing
phone symbol is displayed to the right of the MFD page title as shown in Figure 8-83.
Incoming Call Pop-up
To answer an incoming call in the cockpit:
1) Press the TEL Key on the appropriate audio panel.
2) Press the ANSWER Softkey on the MFD.
Or :
While viewing the AUX‑TELEPHONE Page
1) Press the TEL Key on the appropriate audio panel.
2) Press the MENU Key to display the Page Menu.
3) Turn either FMS Knob to place the cursor on 'Answer Incoming Call'.
4) Press the ENT Key.
Selecting the IGNORE Softkey will extinguish the pop-up window and leave the current call unanswered.
Selecting the IGNRE ALL Softkey will extinguish the pop-up window for the current and all future incoming
calls and leave the current call unanswered. Selecting the TEL Softkey will display the AUX-TELEPHONE
Page allowing additional call information to be viewed before answering.
Disabling incoming call alerts:
1) With the AUX‑TELEPHONE Page displayed, press the MENU Key on the MFD to display the Page Menu.
2) Turn either FMS Knob to place the cursor on 'Disable Incoming Call Alerts'.
3) Press the ENT Key. The voice and pop‑up alert will not be displayed now when an incoming call is received.
530
Figure 8-83 Incoming Call
Garmin G1000 Pilot's Guide for the Diamond DA62
Incoming Call Symbol on MFD Page
190-01895-00 Rev. A