Garmin G1000 Diamond DA62 Pilot's Manual page 248

FLIGHT MANAGEMENT
Procedure Loading Page Selection Softkeys
Viewing available departures at an airport:
1) From the Airport Information Page (first page in the WPT group), select the DP Softkey. The Departure Information
Page is displayed, defaulting to the airport displayed on the Airport information Page.
2) To select another airport, press the FMS Knob to activate the cursor, enter an identifier/facility name/city, and
press the ENT Key.
3) Turn the large FMS Knob to highlight the Departure. The departure is previewed on the map.
4) Turn the small FMS Knob to view the available departures. Press the ENT Key to select the departure. The cursor
moves to the Runway box. The departure is previewed on the map.
5) Turn the small FMS Knob to view the available runways. Press the ENT Key to select the runway. The cursor
moves to the Transition box (only if there are available transitions). The departure is previewed on the map.
6) Turn the small FMS Knob to view the available transitions. Press the ENT Key to select the transition. The cursor
moves to the Sequence box. The departure is previewed on the map.
7) Select the INFO-1/2 Softkey to return to the Airport Information Page.
234
Selected Departure
Figure 5-97 Departure Loading
Garmin G1000 Pilot's Guide for the Diamond DA62
Loaded Departure
190-01895-00 Rev. A