Garmin G1000 Diamond DA62 Pilot's Manual page 255

FLIGHT MANAGEMENT
a) To skip setting minimums, press the ENT Key.
6) Press the ENT Key with 'LOAD?' highlighted to load the approach procedure; or turn the large FMS Knob to
highlight 'ACTIVATE' and press the ENT Key to load and activate the approach procedure.
When GPS is not approved for the selected final approach course, the message 'NOT APPROVED
NOTE:
FOR GPS' is displayed. GPS provides guidance to the approach, but the HSI must to be switched to a NAV
receiver to fly the final course of the approach.
Available Procedure Actions
Destination Airport
Loaded Procedures Approach Preview Approach Choices
Figure 5-100 Approach Selection
Selected Approach Loaded Approach
Procedure Loading Page Selection Softkeys LOAD or ACTIVATE? Annunciation
Figure 5-101 Approach Loading
190-01895-00 Rev. A Garmin G1000 Pilot's Guide for the Diamond DA62 241