Table of Contents
Advertisement
ADDITIONAL FEATURES
Setting a preset channel number:
1) On the XM Radio Page, while listening to an Active Channel that is wanted for a preset, press the PRESETS
Softkey to access the first five preset channels (PS1 - PS5).
2) Press the MORE Softkey to access the next five channels (PS6 – PS10), and again to access the last five
channels (PS11 – PS15). Pressing the MORE Softkey repeatedly cycles through the preset channels.
3) Press any one of the (PS1 - PS15) softkeys to assign a number to the active channel.
4) Press the SET Softkey on the desired channel number to save the channel as a preset.
Press SET to
Save Each
Preset Channel
Pressing the BACK Softkey, or waiting during 45 seconds of softkey inactivity, returns the system to the top
level softkeys.
VOLUME
Radio volume is shown as a percentage. Volume level is controlled by pressing the VOL Softkey, which
brings up the MUTE Softkey and the volume increase and decrease softkeys.
Adjusting the volume:
1) With the XM Radio Page displayed, press the VOL Softkey.
2) Press the VOL – Softkey to reduce volume or press the VOL + Softkey to increase volume. (Once the VOL
Softkey is pressed, the volume can also be adjusted using the small FMS Knob.)
Radio volume may also be adjusted at each passenger station.
Mute SiriusXM audio:
1) Select the XM Radio Page or XM Information Page.
2) Press the MUTE Softkey to mute the audio. Press the MUTE Softkey again to unmute the audio.
526
Figure 8-78 Accessing and Selecting Preset SiriusXM Channels
Figure 8-79 Volume Control
Garmin G1000 Pilot's Guide for the Diamond DA62
Press PRESETS to
Access the Preset
Channels Softkeys
Press MORE to Cycle
Through the Preset
Channels
190-01895-00 Rev. A
Advertisement
Table of Contents
Troubleshooting
