Garmin G1000 Diamond DA62 Pilot's Manual page 132

AUDIO PANEL AND CNS
STANDBY MODE (MANUAL)
In Standby Mode, the IDENT function is inoperative.
NOTE:
Standby Mode can be selected at any time by pressing the STBY Softkey. In Standby, the transponder does
not reply to interrogations, but new codes can be entered. When Standby is selected, a white STBY indication
and transponder code appear in the mode field of the Transponder Data Box. In all other modes, these fields
appear in green.
MANUAL ON MODE
ON Mode can be selected at any time by pressing the ON Softkey. ON Mode generates Mode A and Mode S
replies as well as transmission of acquisition and extended squitters, including ADS-B out (if equipped).
Mode C altitude reporting is inhibited. In ON Mode, a green ON indication and transponder code appear in
the mode field of the Transponder Data Box.
118
Figure 4-37 Standby Mode
Figure 4-38 ON Mode
Garmin G1000 Pilot's Guide for the Diamond DA62
STBY Mode (White
Code Number and
Mode)
ON Mode
(No Altitude
Reporting)
190-01895-00 Rev. A