Garmin G1000 Diamond DA62 Pilot's Manual page 378

HAZARD AVOIDANCE
Adjusting antenna tilt on the Vertical Scan display:
1) Press the TILT Softkey to activate the cursor in the TILT field and display the Tilt Line.
If the Tilt Line is not displayed, press the MENU Key and turn the large FMS Knob to select Show Tilt Line. Press
the ENT Key.
2) Turn the small FMS Knob to adjust the antenna tilt angle. The selected tilt angle is implemented when Horizontal
Scan is selected again.
The Joystick can also be used to adjust tilt.
Tilt Line
Scan Line
364
Figure 6-109 Adjusting Tilt on Vertical Scan Display
Garmin G1000 Pilot's Guide for the Diamond DA62
190-00-01895-00 Rev. A