Garmin G1000 Diamond DA62 Pilot's Manual page 151

displaying traffic advisory alerts automatically adjusts to the smallest map range clearly showing the traffic
advisory. When terrain or traffic alerts clear, the map returns to the previous auto zoom range based on the
active waypoint.
The auto zoom function can be turned on or off independently for the PFDs and MFD. Control of the
ranges at which the auto zoom occurs is done by setting the minimum and maximum 'look forward' times
(set on the Map Setup Window for the Map Group). These settings determines the minimum and maximum
distance to display based upon the aircraft' s ground speed.
• Waypoints that are long distances apart cause the map range to increase to a point where many details on
the map are decluttered. If this is not acceptable, lower the maximum look ahead time to a value that limits
the auto zoom to an acceptable range.
• Waypoints that are very short distances apart cause the map range to decrease to a point where situational
awareness may not be what is desired. Increase the minimum look ahead time to a value that limits the auto
zoom to a minimum range that provides acceptable situational awareness.
• Flight plans that have a combination of long and short legs cause the range to increase and decrease as
waypoints sequence. To avoid this, auto zoom can be disabled or the maximum/minimum times can be
adjusted.
• The 'time out' time (configurable on the Map Setup Page for the Map Group) determines how long auto
zoom is overridden by a manual adjustment of the range knob. At the expiration of this time, the auto
zoom range is restored. Setting the 'time out' value to zero causes the manual override to never time out.
• When the maximum 'look forward' time is set to zero, the upper limit becomes the maximum range available
(2000 nm).
• When the minimum 'look forward' time is set to zero, the lower limit becomes 1.5 nm.
Off, MFD Only, PFD Only, All On
Configuring automatic zoom:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the 'Map' group.
190-01895-00 Rev. A
Auto Zoom:
Manual Range Override
Expiration Time
Figure 5-7 Map Setup Menu Window - Map Group, Auto Zoom
Garmin G1000 Pilot's Guide for the Diamond DA62
FLIGHT MANAGEMENT
Maximum Look Forward Time
Minimum Look Forward Time
137