Garmin G1000 Diamond DA62 Pilot's Manual page 545

OUTGOING CALLS
Voice calls can be made from the cockpit to an external phone through the Iridium Satellite Network.
The Push-to-Talk switch is not utilized for telephone communication. The microphone is active after
NOTE:
selecting the ANSWER Softkey, and stays active until the call is terminated.
To make a call:
1) Press the TEL Key on the audio panel.
2) Press the DIAL Softkey on the MFD. A display similar to Figure 8‑84 will be shown.
Or :
While viewing the AUX‑TELEPHONE Page:
a) Press the TEL Key on the audio panel.
b) Press the MENU Key to display the Page Menu.
c) Turn either FMS Knob to place the cursor on 'Dial a Phone Call'.
d) Press the ENT Key.
3) Enter the desired telephone number by selecting the number softkeys on the MFD or by pressing the numeric
keys on the MFD Control Unit. The International dialing sequence is necessary to place a call from the cockpit
to an external phone: Country Code + City/Area Code (if any) + Telephone Number.
190-01895-00 Rev. A
Figure 8-84 Initiating a Call
Garmin G1000 Pilot's Guide for the Diamond DA62
ADDITIONAL FEATURES
531