Unix Workstation Software; Phaserprintª For Unix Software; Downloadable Printer Utility Files - Tektronix Phaser 360 User Manual

UNIX workstation software

PhaserPrint™ for UNIX software
Downloadable printer utility files
For UNIX environments, Tektronix offers the optional PhaserPrintª for
UNIX software. PhaserPrint for UNIX software includes driver-selectable
printer options, and provides fast, raster Þle and screen copy printing to
Tektronix color printers. The printerÕs CD-ROM contains a demonstration
copy of the PhaserPrint for UNIX software, and an on-line instruction guide,
in the UNIXDEMO directory. To purchase a licensed copy of this software,
see page 10-6 for instructions.
Note
Refer to the on-line manuals on the printer's CD-ROM for more
information on printing from a workstation.
If you do not have a licensed copy of PhaserPrint for UNIX software, you
can use the PostScript utility Þles on the Phaser 360 printerÕs CD-ROM with
UNIX and VMS workstations. These Þles let you set up your spooling
system to select between media trays, print-quality modes, color correction
modes, and other print controls. UNIX workstation users can access utility
Þles in the following ways:
Copy the Þles from the Tektronix Phaser 360 printerÕs CD-ROM if
your system includes a CD-ROM drive. Workstation-speciÞc Þles
are located in the bin directory.
Copy the Þles from the printerÕs diskettes. Workstation Þles are
available in both Macintosh and PC format.
Access the Þles via the Internet:
http://www.tek.com/Color_Printers/support
ftp://ftp.tek.com/cpid/bbs/<platform>/360
(where <platform> is pcs, macintosh, or unix)
Download utility Þles from the Tektronix Bulletin Board
Service (BBS); refer to the printerÕs CD-ROM for information.
Installing Printer Software
Home page
Utility Þles
User Manual
3
3-23