Installing The Tektronix Driver For Windows 3.1; If You Have Other Tektronix Printer Drivers Already Installed - Tektronix Phaser 340 Service Manual

Installing the Tektronix driver for Windows 3.1

19. If your printer is set up correctly and if you clicked Yes in Step 17, a
test page prints showing the Windows 95 logo and information on
your printer.
The Phaser 340 printer should appear in the Printers window.
The Tektronix Windows driver is a Windows PostScript driver customized for
Tektronix printers. These instructions assume a basic familiarity with Windows
operation and terminology. For additional information about Windows, refer to
your Microsoft Windows documentation.
1.
Insert the Tektronix Windows 3.1 Printer Driver diskette into your
computer's disk drive, for example, drive B.
2. Start Windows.
3. Open the Control Panel. Double-click the Printers icon; the Printers
dialog box appears.
4.
Choose the Add>> button.
5. In the List of Printers, select Install Unlisted or Updated Printer.
6. Choose the Install button.
Note
Printers using the Tektronix driver for Windows will have (TekColor)
listed in their name. Printers without this designation are using the
standard Microsoft Windows PostScript driver and the WPD file.
7. Type in the drive the PC diskette is in, for example drive B:, and
choose the OK button.
8. Select your printer and choose OK; the driver software you need is
automatically installed.
9.
Continue with the later topic "Configuring the Tektronix Windows
printer driver" on page 2-26.

If you have other Tektronix printer drivers already installed

If you still have an earlier version of the Tektronix Windows driver, you can use
the INSTALL.EXE program on that "old" driver diskette to remove the older
driver software.
1.
Start Windows.
2.
Insert your older Tektronix Windows driver diskette into your
computer's disk drive, for example, drive B.
3. Click File.
Installing the Printer and Drivers
Service Manual
2
2-25