Finding The Printer's Name In The Chooser - Tektronix Phaser 740 Setup Manual

3
EtherTalk, LocalTalk, and TokenTalk Configuration

Finding the printer's name in the Chooser

22
PhaserShare Networking
1.
From the Apple menu, select Chooser.
2.
In the upper-left corner of the Chooser, find the driver icon. (If the
driver icon is not in the Chooser, you need to install the printer driver.)
Click the driver icon.
3.
If a list of zones appears in the lower-left portion of the Chooser, select
the proper zone.
N
O T E
The printer's default zone is listed on the Configuration Page in the EtherTalk
or TokenTalk field. For more information on the Configuration Page, see
"Printing a Configuration Page" on page 2.
4.
A list of printers appears in the right portion of the Chooser; find your
printer's name. The printer's default name is listed on the
Configuration Page (see "Printing a Configuration Page" on page 2). If
the name does not appear, check the cable connection between your
printer and the network.
N
O T E
It is possible for the Printer Name field on the Configuration Page to be blank.
When the printer is powered up, it uses a default name and then checks to see
that no other printer on the network has the same name. If enough printers
with the same default name are present, it can take several minutes for the
printer to establish a unique name. If the Printer Name field on the
Configuration Page is blank, wait a short time and reprint the Configuration
Page.