Structure With Modules On Cc-Link Ie Tsn - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

Structure with modules on CC-Link IE TSN

Connection with modules on CC-Link IE TSN only
■Line topology
The network is configured in a line topology.
• Up to eight CC-Link IE TSN Class B devices can be connected to the master station.
No.0
Class B
No.0: Master station
(1) Remote station (1st station)
(2) Remote station (2nd station)
(3) Remote station (8th station)
(4) Remote station (9th station)
Class A: CC-Link IE TSN Class A device
Class B: CC-Link IE TSN Class B device
• A CC-Link IE TSN Class B device cannot be connected to a CC-Link IE TSN Class A device.
No.0
Class B
No.0: Master station
No.1, No.2, No.3, and No.4: Remote station
Class A: CC-Link IE TSN Class A device
Class B: CC-Link IE TSN Class B device
• Connection cannot be made if the total cyclic data size of all device stations on the CC-Link IE TSN Class A device side
that form a boundary between CC-Link IE TSN Class B and CC-Link IE TSN Class A devices exceeds 2K bytes.
No.0
Class B
No.0: Master station
No.1, No.2, No.3, and No.4: Remote station
Class A: CC-Link IE TSN Class A device
Class B: CC-Link IE TSN Class B device
 Set the total cyclic data size within 2K bytes.
4 SYSTEM CONFIGURATION
80
4.4 Structure of CC-Link IE TSN Class B/A Devices (CC-Link IE TSN Protocol version 1.0 Only) and Ethernet Devices
(1)
Class B
(2)
Class B
No.1
Class B
No.2
Class B
No.1
Class B
No.2
Class B
(3)
Class B
No.3
Class A
No.3
Class A
(4)
Class A
No.4
Class B
Ò
No.4
Class A