Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual page 181

Own station information
The information of the own station on the network is stored.
■Own station (network card) information (Un\G87906 to Un\G87913)
Address
Un\G87906
Un\G87907
Un\G87908
Un\G87909
Un\G87910
Un\G87911 to Un\G87913
■Own station (controller) information (Un\G87914 to Un\G87937)
Address
Un\G87914
Un\G87915
Un\G87916
Un\G87917
Un\G87918
Un\G87919
Un\G87920 to Un\G87929
Un\G87930 to Un\G87931
Un\G87932 to Un\G87937
Communication path determination status
■Communication path determination status (Un\G88898 to Un\G88913)
The determination information on the communication path for each network number of the destination station is stored.
• 0: Path undetermined
• 1: Path determined
Address b15 b14
Un\G88898 16 15

Un\G88912 Empty 239
Un\G88913 Empty
The numbers in the table indicate network numbers.
Name
Manufacturer code
Model type
Model code (lower 2 bytes)
Model code (upper 2 bytes)
Version
MAC address
Name
Controller information valid/invalid
flag
Manufacturer code
Model type
Model code (lower 2 bytes)
Model code (upper 2 bytes)
Version
Model name string
Vendor-specific device
information
System area
b13 b12 b11 b10
14 13 12 11
238 237 236 235
Description
The Motion module information of the own station is stored.
(Also used in the CLPA conformance test.)
(Updated even if set as an error invalid station.)
(Updated even if set as a reserved station.)
The own station MAC address is stored.
Un\G87911: 5th byte, 6th byte of the MAC address
Un\G87912: 3rd byte, 4th byte of the MAC address
Un\G87913: 1st byte, 2nd byte of the MAC address
Description
Whether the value stored in the own station (controller) information is valid or invalid is
stored.
• 0: Invalid
• 1: Valid
The Motion module information of the own station is stored.
b9 b8 b7 b6 b5
10 9 8 7 6
234 233 232 231 230
b4 b3 b2 b1 b0
5 4 3 2 1
229 228 227 226 225
APPX
Appendix 1 Buffer Memory
A
179