Table of Contents
Advertisement
16
CC-Link IE TSN/CC-Link IE Field DIAGNOSTICS
For CC-Link IE TSN, monitor the status and conduct an operation test.
For details on CC-Link IE TSN/CC-Link IE Field diagnostics, refer to the following.
User's manual for the master station used
Remote reset
Perform the following operation to remotely reset a selected FPGA module.
1.
Select a device station to be reset and click the [Remote Operation] button.
2.
Follow the on-screen instructions and click the [Yes] button.
3.
Follow the on-screen instructions and click the [OK] button.
Precautions
■Remote reset
Remote reset of the FPGA module may cause the following because it affects communications on another station.
• Another station is disconnected.
■Setting of function setting switches
When remote reset is performed, if the setting of function setting switch 1, 2, or 3 is different from the setting at power-on, a
Remote reset disable error (error code: 1090H) occurs, and the FPGA module is not reset.
16 CC-Link IE TSN/CC-Link IE Field DIAGNOSTICS
430
Advertisement
Table of Contents
Troubleshooting
