Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual page 185

Own node setting status storage area
■Own node IP address (Un\G93574 to Un\G93575)
The setting values of the IP address are stored.
Range: 1H to DFFFFFFEH
■Subnet mask (Un\G93584 to Un\G93585)
The setting values of the subnet mask are stored.
Range: 1H to FFFFFFFFH
0: No setting
■Default gateway IP address (Un\G93588 to Un\G93589)
The setting values of the default gateway are stored.
Range: 1H to DFFFFFFEH
0: No setting
■Own node MAC address (Un\G93598 to Un\G93600)
The own node MAC addresses are stored.
• Un\G52252: 5th byte, 6th byte of the MAC address
• Un\G52253: 3rd byte, 4th byte of the MAC address
• Un\G52254: 1st byte, 2nd byte of the MAC address
■Own node network number (Un\G93601)
The setting value of the network number is stored.
Range: 1 to 239
0: Network number not set
■Station number (Un\G93602)
The setting value of the station number is stored.
Range: 1 to 24
0: Station number not set
125: Master station
■Transient transmission group No. (Un\G93603)
The setting value of the transient transmission group number is stored.
Range: 1 to 32
0: No group specification
■Auto-open UDP port port number (Un\G93607)
The port number used for the auto-open UDP port is stored.
■MELSOFT transmission port (TCP/IP) port number (Un\G93608)
The port number used for the MELSOFT transmission port (TCP/IP) is stored.
■MELSOFT transmission port (UDP/IP) port number (Un\G93609)
The port number for the MELSOFT transmission port (UDP/IP) is stored.
■SLMP transmission port (TCP/IP) port number (Un\G93611)
The port number used for the SLMP transmission port (TCP/IP) is stored.
■SLMP transmission port (UDP/IP) port number (Un\G93612)
The port number used for the SLMP transmission port (UDP/IP) is stored.
APPX
Appendix 1 Buffer Memory
A
183