Structure Of Cc-Link Ie Tsn Class B/A Devices (Mixture Of Cc-Link Ie Tsn Protocol Version 1.0 And 2.0); And Ethernet Devices - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

4.3
Structure of CC-Link IE TSN Class B/A Devices
(Mixture of CC-Link IE TSN Protocol version 1.0
and 2.0) and Ethernet Devices
The following diagram shows the system configuration under the conditions below:
• "Mixture of CC-Link IE TSN Class B/A or CC-Link IE TSN Class A Only" set for "Connection Device Information" under
"Basic Settings" in the engineering tool
• Master station firmware version "1.002" or later
• CC-Link IE TSN-compatible devices with the CC-Link IE TSN Protocol versions 1.0 and 2.0
For the maximum number of connectable stations when "Connection Device Information" under "Basic Settings" of the master
station is set to "Mixture of CC-Link IE TSN Class B/A or CC-Link IE TSN Class A Only", check the following.
Page 20 Performance Specifications of CC-Link IE TSN
No.0 No.1
Class B (1 Gbps) Class B (1 Gbps)
No.0: Master station
No.1, No.2, No.3, No.4: Remote station
(1), (2) Ethernet device
Class A: CC-Link IE TSN Class A device
Class B: CC-Link IE TSN Class B device
The following terms are used to describe the terms in the tables.
(1) (2)
No.0 No.1
4.3 Structure of CC-Link IE TSN Class B/A Devices (Mixture of CC-Link IE TSN Protocol version 1.0 and 2.0) and Ethernet Devices
No.2 No.3
Class B (1 Gbps) Class B (1 Gbps)
(1) (2)
No.2 No.3
(1)
(1 Gbps)
General-purpose
switching hub
(2)
(100 Mbps)
No.4
Class A (100 Mbps)
No.0: Master station
No.1, No.2, No.3: Remote station
(1) Device on the master station side (The
master station or a device near the master
station)
(2) Device on the end side (A device far from the
master station)
4 SYSTEM CONFIGURATION
4
73