Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual page 104

Item
1 to 256 Link Side
CPU Side
Precautions
■Device set to "CPU Side"
Set a device range not to overlap the one used for the following:
• "Refresh settings" of intelligent function modules
■Link refresh range
Set only link devices used in the CPU module for link refresh range. Doing so will reduce the number of excess points,
resulting in a shorter link refresh time.
5 PARAMETER SETTINGS
102
5.3 Basic Settings
Description
Set the link refresh ranges of RX, RY, RWr, and RWw. A maximum of 256 points
can be set for the link refresh range of each. (Page 27 Link refresh)
Ex.
00000H
Transfer 1
Device name
·
(RX)
000FFH
00000H
Transfer 2
Device name
·
(RY)
000FFH
Transfer 3
00000H
Device name
·
(RWr)
000FFH
Transfer 4
00000H
Device name
·
(RWw)
000FFH
Motion module
01000H
Device name
·
(X)
010FFH
01000H
Device name
·
(Y)
010FFH
00000H
Device name
·
(W)
000FFH
00100H
Device name
·
(W)
001FFH
CPU module
Setting range
■Device name
• RX, RY, RWr, RWw
(Default: empty)
■Points
• RX, RY: 16 to 8192 (set in increments of 16
points)
• RWr, RWw: 4 to 1024 (set in increments of 4
points)
(Default: empty)
■Start
• RX, RY: 0H to 1FF0H (set in increments of 16
points)
• RWr, RWw: 0 to 3FCH (set in increments of 4
points)
(Default: empty)
■End
• RX, RY: FH to 1FFFH (set in increments of 16
points)
• RWr, RWw: 3H to 3FFH (set in increments of 4
points)
(Default: empty)
■Target
• Specify Device
(Default: empty)
■Device name
• Specify Device (link side is RX): X, M, L, B, D,
W, R
• Specify Device (link side is RY): Y, M, L, B, D, W,
R
• Specify Device (link side is RWr, RWw): M, L, B,
D, W, R
(Default: empty)
■Points, End
Displayed according to setting of "Start".
(Default: empty)
■Start
Device range of CPU modules (Set bit devices in
increments of 16 points and word devices in
increments of 4 points.)
(Default: empty)