Remote password function monitoring area
■Auto-open UDP port continuous unlock failure count (Un\G94854)
The mismatch count of remote password at unlock of the auto-open UDP port is stored. The count is cleared when the
password matches.
Range: 0 to 65535 (Values of 65535 or more are not changed)
■MELSOFT transmission port (UDP/IP) continuous unlock failure count (Un\G94855)
The mismatch count of remote password at unlock of the MELSOFT transmission port (UDP/IP) is stored. The count is
cleared when the password matches.
Range: 0 to 65535 (Values of 65535 or more are not changed)
■MELSOFT transmission port (TCP/IP) continuous unlock failure count (Un\G94856)
The mismatch count of remote password at unlock of the MELSOFT transmission port (TCP/IP) is stored. The count is
cleared when the password matches.
Range: 0 to 65535 (Values of 65535 or more are not changed)
■SLMP transmission port (UDP/IP) continuous unlock failure count (Un\G94859)
The mismatch count of remote password at unlock of the SLMP transmission port (UDP/IP) is stored. The count is cleared
when the password matches.
Range: 0 to 65535 (Values of 65535 or more are not changed)
■SLMP transmission port (TCP/IP) continuous unlock failure count (Un\G94860)
The mismatch count of remote password at unlock of the SLMP transmission port (TCP/IP) is stored. The count is cleared
when the password matches.
Range: 0 to 65535 (Values of 65535 or more are not changed)
Network type information area
■Network type information (Un\G94907)
• 5: CC-Link IE TSN
Ethernet information
■Initial status (Un\G94942)
The initial processing status of the Motion module Ethernet connection is stored.
[b0]: Initial normal completion status
• 0:
• 1: Initialization normal completion
[b1]: Initial abnormal completion status
• 0:
• 1: Initialization abnormal completion
[b2 to b15]: Not used (Use prohibited)
■Initial error code (Un\G94943)
The information when the initial processing is completed with an error is stored.
• 0: In initial processing or initial normal completion
• 1 or more: Initialization abnormal code
Receive buffer status storage area
■Receive buffer status (Un\G94948)
The receive buffer status is stored.
• 0: Receive buffer not full
• 1: Receive buffer full
APPX
Appendix 1 Buffer Memory
A
187