Structure With Modules On Cc-Link Ie Tsn Only - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

Structure with modules on CC-Link IE TSN only

Connection with modules on CC-Link IE TSN only
■Line topology
The network is configured in a line topology. A TSN switching hub is not required.
When an error occurs in a device station, the stations connected after the faulty station will be disconnected.
No.0 No.1
No.0: Master station
No.1, No.2, No.3, and No.4: Remote station
■Star topology
The network is configured in a star topology via a TSN switching hub. This allows devices to be added easily.
TSN switching HUB
No.1
No.0
No.0: Master station
No.1 and No.2: Remote station
Even when an error occurs in a device station, a data link can be continued with the stations that are operating normally.
■Coexistence of line and star topologies
Line and star topologies can be mixed in the same network configuration.
TSN switching HUB
No.0
No.0: Master station
No.1, No.2, No.3, and No.4: Remote station
No.2
No.2
No.1
No.3
4.1 Structure of CC-Link IE TSN Class B devices and Ethernet devices
No.3
No.2
No.4
4 SYSTEM CONFIGURATION
No.4
4
57