Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual page 56

CC-Link IE TSN Class Setting
From "Connection Device Information" under "Basic Settings" of the engineering tool, select either of the following items
according to devices to be connected.
Connected device
information
CC-Link IE TSN Class B
Only
Mixture of CC-Link IE TSN
Class B/A or CC-Link IE
TSN Class A Only
*1 IEEE 1588 if the firmware version of the master station is "1.001" or earlier.
IEEE 802.1AS or IEEE 1588 depending on the CC-Link IE TSN Protocol version of the CC-Link IE TSN-compatible device when the
firmware version of the master station is "1.002" or later.
For details, refer to the following.
Page 76 Connection configuration of CC-Link IE TSN-compatible devices
Ethernet connection
For connection with MELSOFT products and connection with SLMP-compatible devices, refer to the following.
Page 23 Ethernet connection
4 SYSTEM CONFIGURATION
54
System configuration
Select this if the system is to be configured without connecting the CC-Link IE
TSN Class A device.
• Page 57 Connection with modules on CC-Link IE TSN only
• Page 60 Connection with modules on CC-Link IE TSN and Ethernet
devices
Select this if a CC-Link IE TSN Class A device is connected to a CC-Link IE
TSN Class B device or if you want to configure a system with a CC-Link IE TSN
Class A connected in the future. (Connection is also possible when the system
is configured with CC-Link IE TSN Class B devices only.)
• Page 62 Structure of CC-Link IE TSN Class B/A Devices (CC-Link IE
TSN Protocol version 2.0 Only) and Ethernet Devices
• Page 73 Structure of CC-Link IE TSN Class B/A Devices (Mixture of CC-
Link IE TSN Protocol version 1.0 and 2.0) and Ethernet Devices
• Page 77 Structure of CC-Link IE TSN Class B/A Devices (CC-Link IE
TSN Protocol version 1.0 Only) and Ethernet Devices
Switching hub Standard
TSN switching hub (CC- IEEE802.1AS
Link IE TSN Class B
switching hub)
General-purpose switching IEEE 802.1AS
hub (CC-Link IE TSN Class or IEEE
A switching hub) 1588
*1