Chapter 4 System Configuration - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

4
SYSTEM CONFIGURATION
CC-Link IE TSN is configured using Ethernet cables.
For details, refer to "WIRING" in the following manual.
MELSEC iQ-F FX5 Motion Module/Simple Motion Module User's Manual (Startup)
(5)
(4)
(1) Motion module
(2) Drive unit
(3) Inverter device
(4) Remote I/O module
(5) Ethernet device (such as a vision sensor)
System configuration list
The following table shows the system configuration list.
Configuration
Structure of CC-Link IE TSN Class B
devices and Ethernet devices
Structure of CC-Link IE TSN Class B/A
devices and Ethernet devices
The firmware version can be found in the following locations.
• The module diagnostics (CPU diagnostics) window of the engineering tool
• 'MIB information firmware version' (Un\G62933) (Page 175 Firmware version (Un\G62915))
For details on MIB information, refer to the following.
Page 169 Buffer Memory
Precautions
To connect modules on CC-Link IE TSN, a dedicated TSN switching hub may be required depending on parameter settings or
the network topology used.
(3) (2)
Firmware version of the
master station

"1.002" or later
"1.001" or later
(1)
CC-Link IE TSN Protocol
version of CC-Link IE TSN-
compatible device

2.0 only
Mixture of 1.0 and 2.0
1.0 only
4 SYSTEM CONFIGURATION
Reference
Page 55 Structure of CC-Link IE
TSN Class B devices and Ethernet
devices
Page 62 Structure of CC-Link IE
TSN Class B/A Devices (CC-Link IE
TSN Protocol version 2.0 Only) and
Ethernet Devices
Page 73 Structure of CC-Link IE
TSN Class B/A Devices (Mixture of
CC-Link IE TSN Protocol version 1.0
and 2.0) and Ethernet Devices
Page 77 Structure of CC-Link IE
TSN Class B/A Devices (CC-Link IE
TSN Protocol version 1.0 Only) and
Ethernet Devices
4
53