Structure of modules on CC-Link IE TSN and Ethernet devices
Connection with modules on CC-Link IE TSN and Ethernet devices
■Line topology
The network with modules and devices is configured in a line topology. A general-purpose switching hub is not required.
Connect Ethernet devices to the end of the network.
No.0
Class B
No.0: Master station
No.1, No.2: Remote station
(1) Ethernet device
Class A: CC-Link IE TSN Class A device
Class B: CC-Link IE TSN Class B device
When an error occurs in a device station, the stations connected after the faulty station will be disconnected.
■Star topology
The network is configured in a star topology via a switching hub.
General-purpose
No.0
switching hub
Class B
or
TSN switching hub
No.1
Class A
A
No.0: Master station
No.1, No.2: Remote station
(1) Ethernet device
Class A: CC-Link IE TSN Class A device
Class B: CC-Link IE TSN Class B device
4.2 Structure of CC-Link IE TSN Class B/A Devices (CC-Link IE TSN Protocol version 2.0 Only) and Ethernet Devices
No.1
Class B
No.2
Class A
(1)
No.2
Class A
(1)
4 SYSTEM CONFIGURATION
4
71