Security - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

Security

Set the security measures for access to the Ethernet device.
Item
IP Filter Settings IP Filter
IP Filter Settings
IP Filter Settings
Up to 32 IP addresses can be set as an IP address to be allowed or denied by the IP filter.
Range specification as a single setting and specification of the IP addresses to be excluded from the set range are also
possible.
Item
Access from IP address below
Range Setting
IP Address
IP Address Excluded from Range
Description
Set whether to use the IP filter.
Set the IP addresses to be allowed or denied.
Description
Select whether to allow or deny the access from the specified IP addresses.
Select this item when specifying the IP addresses by range.
Set the IP addresses to be allowed or denied.
When selecting "Range Setting", enter the start IP address (left field) and end IP
address (right field) of the range.
When selecting "Range Setting", set the IP address to be excluded from the set
range.
Up to 32 IP addresses can be set.
Setting range
• Do Not Use
• Use
(Default: Do Not Use)

Setting range
• Allow
• Deny
(Default: Allow)
(Default: Clear)
0.0.0.1 to 223.255.255.254
(Default: empty)
0.0.0.1 to 223.255.255.254
(Default: empty)
5 PARAMETER SETTINGS
5.4 Application Settings
5
107