Connection Configuration Of Cc-Link Ie Tsn-Compatible Devices - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

Motion module
Hide thumbs Also See for MELSEC iQ-F FX5 Series:
Table of Contents

Advertisement

Connection configuration of CC-Link IE TSN-compatible devices

The following table shows time synchronization methods based on the CC-Link IE TSN Protocol version 2.0 support status of
each CC-Link IE TSN-compatible device in the network.
With CC-Link IE TSN Protocol version 1.0: Devices that do not support the CC-Link IE TSN Protocol version 2.0 are included.
CC-Link IE TSN Protocol version 2.0 only: There are only devices that support the CC-Link IE TSN Protocol version 2.0.
Mixture of device station CC-Link
IE TSN Protocol version 1.0/2.0
CC-Link IE TSN
CC-Link IE TSN
Class A device
Class B device
With CC-Link IE
With CC-Link IE
TSN Protocol
TSN Protocol
version 1.0
version 1.0
CC-Link IE TSN
Protocol version
2.0 only
CC-Link IE TSN
With CC-Link IE
Protocol version
TSN Protocol
2.0 only
version 1.0
CC-Link IE TSN
Protocol version
2.0 only
Precautions
• The protocol in operation can be found in 'Protocol operating status' (Un\G91270) in the buffer memory.
• While a device is operating with the CC-Link IE TSN Protocol version 2.0, device stations that do not support the CC-Link
IE TSN Protocol version 2.0 may not perform a data link. If a device station that does not support the CC-Link IE TSN
Protocol version 2.0 is detected, that station does not perform a data link, the event code 00C80 is registered on the master
station, and the information about the station that does not support it is stored in 'CC-Link IE TSN Protocol version 2.0
support status for each station' (SW01A0 to SW01A7).
• In a configuration where devices with the CC-Link IE TSN Protocol versions 2.0 and 1.0 coexist, if data link starts late on
CC-Link IE TSN Class A devices due to variation in power-on sequences and start times of device stations at system
startup, devices with the CC-Link IE TSN Protocol version 1.0 may not perform a data link. (The event code 00C80 is
registered on the master station.)
4 SYSTEM CONFIGURATION
76
4.3 Structure of CC-Link IE TSN Class B/A Devices (Mixture of CC-Link IE TSN Protocol version 1.0 and 2.0) and Ethernet Devices
Time synchronization method for devices
CC-Link IE TSN Class A
device
CC-Link IE
CC-Link IE
TSN Protocol
TSN Protocol
version 1.0
version 2.0
IEEE 1588
Not available
IEEE 1588
Not available
Not available
Not available
CC-Link IE TSN Class B
device
CC-Link IE
CC-Link IE
TSN Protocol
TSN Protocol
version 1.0
version 2.0
IEEE 1588
IEEE 1588
IEEE 1588
IEEE 802.1AS
IEEE 802.1AS
IEEE 802.1AS
Connection specifications
Refer to the following.
Page 77 Structure of CC-Link IE
TSN Class B/A Devices (CC-Link IE
TSN Protocol version 1.0 Only) and
Ethernet Devices
Refer to the following.
Page 62 Structure of CC-Link IE
TSN Class B/A Devices (CC-Link IE
TSN Protocol version 2.0 Only) and
Ethernet Devices

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec iq-f fx5-40ssc-gMelsec iq-f fx5-80ssc-g

Table of Contents