Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual page 11

[Operating Precautions]
CAUTION
● Construct an interlock circuit in the program so that the whole system always operates on the safe
side before executing the control (for data change) of the programmable controller in operation. Read
the manual thoroughly and ensure complete safety before executing other controls (program change,
parameter change, forced output, and operation status change) to the programmable controller in
operation. Improper operation may damage machines or cause accidents.
[Disposal Precautions]
CAUTION
● When disposing of this product, treat it as industrial waste.
● When disposing of batteries, separate them from other waste according to local regulations. (For
details on the Battery Directive in EU countries, refer to the user's manual (Hardware) of the CPU
module used.)
[Transportation Precautions]
CAUTION
● When transporting the programmable controller with the optional battery, turn on the programmable
controller before shipment, confirm that the battery mode is set using a parameter and the BAT LED is
off, and check the battery life. If the programmable controller is transported with the BAT LED ON or
the battery exhausted, the battery-backed data may be unstable during transportation.
● The programmable controller is a precision instrument. During transportation, avoid impacts larger
than those specified in the general specifications of the user's manual (Hardware) of the CPU module
used by using dedicated packaging boxes and shock-absorbing palettes. Failure to do so may cause
failures in the programmable controller. After transportation, verify operation of the programmable
controller and check for damage of the mounting part, etc.
● When transporting lithium batteries, follow required transportation regulations. (For details on the
regulated products, refer to the user's manual (Hardware) of the CPU module used.)
● The halogens (such as fluorine, chlorine, bromine, and iodine), which are contained in a fumigant
used for disinfection and pest control of wood packaging materials, may cause failure of the product.
Prevent the entry of fumigant residues into the product or consider other methods (such as heat
treatment) instead of fumigation. The disinfection and pest control measures must be applied to
unprocessed raw wood.
9