Connect - Data Communication; Edit Settings With A Computer - Polar Electro RS200SD User Manual

7. CONNECT - DATA COMMUNICATION

7.1 EDIT SETTINGS WITH A COMPUTER

Your running computer offers you the option of editing the settings of your wrist unit with a computer. You can also
personalize the display of your running computer by downloading logos. For this you need the Polar UpLink Tool™. You can
download the Polar UpLink Tool from www.polar.fi or from www.PolarRunningCoach.com. In order to be able to use the
Polar UpLink Tool, you need a computer with a sound card and dynamic loudspeakers or headphones. See www.polar.fi or
www.PolarRunningCoach.com for further instructions.
To transfer settings from your PC to your running computer:
1. In the Time mode press the / buttons until Connect is displayed. Press the Red button.
2. Hold your running computer within less than 10 cm / 4" from the loudspeakers or headphones. Select Receive from the
menu and confi rm with the Red button.
3. Start the data transfer from your PC.
4. If the data transfer succeeded, UpLink Receive OK! is displayed. If the transfer fails, UpLink Receive Failed! is displayed.
70
ENG