Option A: Set Up With A Mobile Device And Polar Flow App; Option B: Set Up With Your Computer; Option C: Set Up From The Watch - Polar Electro Vantage V2 User Manual

features at their best, it's important that you do the setup later in the Polar Flow web
service or with the Polar Flow mobile app by following the steps in option A or B.

OPTION A: SET UP WITH A MOBILE DEVICE AND POLAR FLOW APP

Please note that you have to do the pairing in the Flow app and NOT in your mobile device's
Bluetooth settings.
1. Make sure your mobile device is connected to the internet and turn on Bluetooth.
2. Download the Polar Flow app from the App Store or Google Play on your mobile device.
3. Open the Flow app on your mobile device.
4. The Flow app recognizes your watch nearby and prompts you to start pairing it. Tap the Start
button.
5. When the Bluetooth Pairing Request confirmation message appears on your mobile device,
check that the code shown on your mobile device matches the code shown on your watch.
6. Accept the Bluetooth pairing request on your mobile device.
7. Confirm the pin code on your watch by pressing OK.
8. Pairing done is displayed once the pairing is completed.
9. Sign in with your Polar account or create a new one. We'll walk you through the sign-up and setup
within the app.
When you're done with the settings, tap Save and sync and your settings are synced to your watch.
If you're prompted to update the firmware, please plug your watch into a power source to ensure
flawless update operation, and then accept the update.

OPTION B: SET UP WITH YOUR COMPUTER

1. Go to flow.polar.com/start and download and then install the Polar FlowSync data transfer
software to your computer.
2. Sign in with your Polar account or create a new one. Plug your watch into your computer's USB
port with the custom cable that came in the box. We'll walk you through the sign-up and setup
within the Polar Flow web service.

OPTION C: SET UP FROM THE WATCH

Adjust the values with UP/DOWN and confirm each selection with OK. If you want to return and change
a setting at any point, press BACK until you reach the setting you want to change.
When you do the setup from the watch, your watch is not yet connected with the Polar Flow web
service. Firmware updates for your watch are available only through Polar Flow. To make sure you get to
enjoy your watch and the unique Polar Smart Coaching features at their best, it's important that you do the
setup later in the Polar Flow web service or with the Flow mobile app by following the steps in option A or B.
13