General Functions - Bosch D9412GV4 Program Entry Manual

108 en | Panel and Area Wide Parameters
Door State
Lock Door
Secure Door
Unlock Door
Cycle Door
Table 3.18 L## Secure Door-Door Mode Definitions
L## Access Control Level
Default:
Selection:
Function No.
37
This feature is not available with the D7212GV4. Keep the default setting.
NOTICE!
Changing the Access Control Level in any area affects all users and all doors associated with
that level for all areas.
3.12.7

General Functions

L## Change Display
Default:
Selection:
Function No.
15
Change the display (bright display, dim display, and time display) in the area where this
keypad is assigned.
L## Change Time/Date
Default:
Selection:
Function No.
16
Change the date and time for the control panel in this area.
L## Change Passcode
Default:
Selection:
Function No.
17
F.01U.218.312 | 04 | 2012.03
Definition
Normal Door: When a door is in the Lock Door state, one can initiate the
door sequence using Skeds, CYCLE DOOR?, keypad functions, door
requests, and valid token or card requests.
No Access Allowed: When a door is in the Secure Door state, no access
is allowed through the door until it is returned to the Lock Door state.
The Secure Door state includes Sked and keypad functions.
Free Access: When a door is in the Unlocked Door state, the door is
already shunted and the door strike does not prevent the door from
opening. In this state, the user does not need to activate a door request
or present a valid token or card.
Momentary Access: This is a temporary Door Mode in which the door
initiates the door sequence as if a valid token or card was read. This state
occurs using the keypad and remote programming software (RPS). A
sked cannot activate this state.
Authority Levels 1, 15: Enabled (E)Authority Levels 2-14: Blank (-)
- or E
Function Name
Access Control Level
Authority Levels 1, 15: Enabled (E)Authority Levels 2-14: Blank (-)
- or E
Function Name
Change Display
Authority Levels 1, 15: Enabled (E)Authority Levels 2-14: Blank (-)
- or E
Function Name
Change Time and Date [COMMAND][4][5]
Authority Levels 1, 15: Enabled (E)Authority Levels 2-14: Blank (-)
- or E
Function Name
Change Passcodes
Program Entry Guide
D9412GV4/D7412GV4/D7212GV4
Alternate Keystroke
(Menu function only)
Alternate Keystroke
[COMMAND][4][9]
Alternate Keystroke
Alternate Keystroke
[COMMAND][5][5]
Bosch Security Systems, Inc.