Bosch D9412GV4 Program Entry Manual page 153

D9412GV4/D7412GV4/D7212GV4
CMD9 Relay
Default:
Selection:
This entry selects a relay (73 to 80 for the D9412GV4 or 9 to 16 for the D7412GV4 and
D7212GV4) when COMMAND 9 is initiated (refer to Section P### Relay Codes/Relays,
page 148 for relay number association).
NOTICE!
COMMAND 9 does not activate the Summary Fire Alarm relay.
CMD9 Point Text
Default:
Selection:
Enter alphabetic characters A to Z in capital letters.
Enter up to sixteen characters of text to describe the point. This point text appears at keypads
(if the point is programmed as visible) and sent to the D6500 or D6600 when transmitting in
Modem IIIa
Bosch Security Systems, Inc.
0
0 to 8
COMMAND 9
Up to sixteen alphanumeric characters
2
format (if it is a reporting point).
Program Entry Guide
Points | en 153
F.01U.218.312 | 04 | 2012.03