General Functions - Bosch D7212GV3 Program Entry Manual

D7212GV3 | Program Entry Guide | 2.0
A# Verify Time for Fire points that is
programmed with Yes for P## Alarm
Verify is ignored during the Fire Walk
Test.
L## Send Report
Default: Refer to the program record sheet
Selection: - or E
Function No. Function Name
13 Send Report
Send a Test Report from any keypad assigned to an
area where the user has authority.
Access Control Functions
The following five functions are used to control the
doors from the keypad. These features are not
available with the D7212GV3.
L## Door Control
Default: Refer to the program record sheet
Selection: - or E
This feature is not available with the D7212GV3.
Keep the default setting.
L## Cycle Door
Default: Refer to the program record sheet
Selection: - or E
This feature is not available with the D7212GV3.
Keep the default setting.
L## Unlock Door
Default: Refer to the program record sheet
Selection: - or E
This feature is not available with the D7212GV3.
Keep the default setting.
L## Secure Door
Default: Refer to the program record sheet
Selection: - or E
This feature is not available with the D7212GV3.
Keep the default setting.
Bosch Security Systems, Inc. | 10/11 | F01U170808-02
Panel and Area Wide Parameters
L## Access Control Level

General Functions

L## Change Display
Alternate Keystroke
[COMMAND][4][1]
or
[COMMAND][4][2]
Change the display (bright display, dim display, and
time display) in the area where this keypad is
assigned.
L## Change Time/Date
Change the date and time for the control panel in this
area.
L## Change Passcode
Change a user passcode.
L## Add User
Add or change users, add or change authority levels,
add or change tokens or cards.
Default: Refer to the program record sheet
Selection: - or E
This feature is not available with the D7212GV3.
Keep the default setting.
Default: Refer to the program record sheet
Selection: - or E
Function Function Name
No.
15 Change Display
Default: Refer to the program record sheet
Selection: - or E
Function Function Name
No.
16
Change Time
and Date
Default: Refer to the program record sheet
Selection: - or E
Function Name
Function
No.
17 Change
Passcodes
Default: Refer to the program record sheet
Selection: - or E
Function Function Name
No.
18 Add User
EN | 64
Alternate
Keystroke
[COMMAND][4][9]
Alternate
Keystroke
[COMMAND][4][5]
Alternate
Keystroke
[COMMAND][5][5]
Alternate
Keystroke
[COMMAND][5][6]