Bosch D9412GV4 Program Entry Manual page 184

184 en | SDI2 Modules
NOTICE!
The keypad does not accept numbers 256 to 999.
7.
Port 77EE Configuration Enable
Default:
Selection:
Yes
No
Port number 77EE (hexadecimal code) is reserved for configuration of the B420 by the remote
application software.
UPnP Enable
Default:
Selection:
Yes
No
Universal Plug and Play (UPnP) allows devices to connect seamlessly and simplifies the
implementation of personal and corporate networks.
Keypad Programming of UPnP Enable
D1255
1.
2.
3.
4.
5.
6.
D1260
1.
2.
3.
4.
5.
6.
HTTP Port Number
Default:
Selection:
Use this option to configure the port number for the B420 web server.
ARP Cache Timeout
Default:
Selection:
F.01U.218.312 | 04 | 2012.03
Press the Save softkey to save the changes.
No
Yes or No
The network module allows configuration to be sent from the network
through port 77FE.
The network modules does not allow configuration to be sent from the
network through port 77FE.
Yes
Yes or No
UPnP is enabled
UPnP is disabled
Refer to Section 2.5.1 Keypad Programming Menu, page 12 to access the TOOLS MENU
and navigate to the PROGRAMMING option.
Press [ENT] to enter the PROGRAMMING option.
Press [ENT] at the MODULE PARAM option to enter it.
Press [ENT] at the UPnP ENABLE option. The keypad shows YES or NO.
To change the setting, press [EDIT] and then press the button for the desired option.
Press [ENTER] to save the changes.
Refer to Section 2.5.1 Keypad Programming Menu, page 12 to access the Tools Menu and
navigate to the Programming option.
Press [ENT] to enter the Programming option.
Press [ENT] at the Module Parameters option to enter it.
Press [ENT] at the UPnP Enable option. The keypad shows Yes or No.
To change the setting, press Edit softkey and then press the softkey for the desired
option.
Press the Save softkey to save the changes.
80
1 to 65535
600
1 to 600 (in 1-sec increments)
Program Entry Guide
D9412GV4/D7412GV4/D7212GV4
Bosch Security Systems, Inc.