Bosch D9412GV4 Program Entry Manual page 97

Table of Contents

Advertisement

D9412GV4/D7412GV4/D7212GV4
Function No.
14
This top level display must be enabled for the user to access the cycle door, unlock door, and
secure door functions (refer to Section 3.12.6 Authority Level Selections, page 102). Use this
item when programming door control in your function menu.
Access Control Level
Default:
Selection:
Function No.
37
This feature is not available with the D7212GV4. Keep the default setting.
Shows the current on or off state of control levels 1 through 14, pertaining to Access Control
Only, (L## Access Level and L## Disarm Level). The user can toggle levels on and off and
invalidate access control levels during an extended period. This change only affects the user's
token or cards; it does not affect keypad Door Control functions.
Change Display
Default:
Selection:
Function No.
15
Use this function to select either a bright or dim display with loud or soft keypad warning
tones. You can also choose the time and date display.
Change Time/Date
Default:
Selection:
Function No.
16
Use this function to set the time and date in the control panel.
Change Passcode
Default:
Selection:
Function No.
17
Use this function to change your passcode. This is a panel-wide function that can be executed
from any keypad assigned to an area where the user has authority.
NOTICE!
Refer to Section 3.12.6 Authority Level Selections, page 102 for a detailed description of the
functions on the following pages. These parameters determine only if the authority level
functions are passcode protected.
NOTICE!
Regardless of whether an E or a P is entered when a COMMAND 55 is performed, the keypad
asks for the user's current passcode first.
Bosch Security Systems, Inc.
Function Name
Door Control
P
-, E, or P
Function Name
Access Control Levels (Menu function only)
E
-, E, or P
Function Name
Change Display
P
-, E, or P
Function Name
Change Time and Date [COMMAND][4][5]
P
-, E, or P
Function Name
Change Passcodes
Program Entry Guide
Panel and Area Wide Parameters | en
Alternate Keystroke
[COMMAND][4][6]
Alternate Keystroke
Alternate Keystroke
[COMMAND][4][9]
Alternate Keystroke
Alternate Keystroke
[COMMAND][5][5]
F.01U.218.312 | 04 | 2012.03
97

Advertisement

Table of Contents
loading

This manual is also suitable for:

D7412gv4D7212gv4

Table of Contents