Bosch D9412GV4 Program Entry Manual page 71

D9412GV4/D7412GV4/D7212GV4
Yes
No
Determines if this area generates Account Opening and Closing Reports. Program this item
the same for all areas in the account.
A# Area O/C
Default:
Selection:
Yes
No
Determines if the area number and the account number are reported at arming and disarming.
As long as Account O/C is No, the account number sends a report when arming this area
individually. If Account O/C is Yes, all areas with the same account number must also be
armed.
An Area Opening Report is generated when each area is opened (disarmed). An Area Closing
Report is generated when each individual area is closed (armed).
NOTICE!
Do not program this item as Yes if the control panel reports to an automation system that
cannot interpret multiple Area Opening and Closing Reports.
Bosch Security Systems, Inc.
Send Opening and Closing Reports by account.
Use this selection if the control panel sends reports to an automation
system that cannot interpret multiple Area Opening and Closing
Reports.
An Account Opening Report is generated when the first area in an
account is opened (disarmed). After the Account Opening Report is
sent, disarming other areas in the account does not generate another
Account Opening Report. An Account Closing Report is generated only
when the last area in an account is closed (armed). Opening and
Closing Reports for accounts do not contain any area information.
Opening and Closing Windows affect Account Opening and Closing
Reports: If an account opening or closing is generated while an
Opening or Closing Window for this area is in effect, and Disable O/C in
Window is programmed Yes, the report is not sent. Use the same
opening and closing window times for all areas sharing the same
account number.
Do not send Opening and Closing Reports by account.
Yes
Yes or No
Include the Area # and generate Opening and Closing Reports for this
area when it is armed.
Do not include the Area # or generate Opening and Closing Reports for
this area.
Program Entry Guide
Panel and Area Wide Parameters | en
F.01U.218.312 | 04 | 2012.03
71