Toyota VELLFIRE 2010 Manual page 9

Machine Translated by Google
Attaching electrical components to the diagnostic connector, etc.
Do not attach electrical components other
than the diagnostic device for inspection and
maintenance to the diagnostic
connector. Doing so may adversely affect
electronic equipment or lead to unexpected
troubles such as a dead auxiliary battery.
About recording vehicle data
Your car is equipped with multiple computers that record data related to vehicle control and
operation, and mainly record the following data. ÿ Engine rotation speed ÿ Electric
motor rotation speed
ÿ Accelerator operation
status ÿ Brake operation
status ÿ Vehicle speed ÿ
Shift
position ÿ Drive battery
status
The data items recorded differ depending on the grade and optional equipment. Note that
the computer does not record audio or video such as conversations. •
Handling of data
Toyota may acquire and use the data recorded in the computer for the purposes of
vehicle failure diagnosis, research and development, and quality improvement.
Except in the following cases, Toyota will not disclose or provide acquired data to third
parties. ÿ When consent is obtained
from the user of the vehicle (consent of the lessee for a leased vehicle) ÿ
When it is based on a legally enforceable request from the police, courts, government
agencies, etc. ÿ For the purpose of statistical processing, the user When providing data
processed so that the vehicle cannot be identified to research institutes, etc.
• Handling of data by T-Connect
If you use T-Connect, please see the T-Connect Terms of Use regarding Recorded Data
and its use.
Fault
diagnosis connector
7