Toyota VELLFIRE 2010 Manual page 273

Machine Translated by Google
Driving in constant speed control mode
In constant speed control mode, the vehicle runs at a constant speed without following the changes in
speed of the preceding vehicle. Use only when the vehicle distance control mode cannot be used due
to dirt on the radar sensor, etc.
Press the ON-OFF switch to turn on the system
1
Press the switch again to turn it off.
Switch to constant speed control
2
mode (Keep pushing the lever forward for
about 1 second)
When switching to constant speed control mode, the cruise control indicator lights up. To return
from constant speed control mode to vehicle distance control mode, push the lever forward again for
about 1 second.
After setting the desired speed, it is not possible to switch to the vehicle distance control mode.
If the power switch is turned off and then turned on again, the vehicle-to-vehicle distance control
mode is automatically restored.
Change the set speed
ÿ P. 268
Release/restore control ÿ P. 269
4-5. Driving support equipment
271
4 driving