Toyota VELLFIRE 2010 Manual page 482

Machine Translated by Google
480 6-2. Simple inspection and parts replacement
caveat
ÿ When replacing the light bulb
•Turn off the lamp. Do not replace the battery immediately after it is turned off as it will be hot.
please give me. Doing so may result in burns.
•Do not touch the glass part of the bulb with bare hands.
If you have no choice but to hold the glass part, hold it with a dry, clean cloth, etc., to
prevent oil and moisture from adhering to the bulb.
Also, if the bulb is damaged or dropped, it may burn out or explode.
• Be sure to attach the light bulb and the parts for fixing the light bulb firmly. Insufficient
installation may cause heat generation or fire, malfunction due to water entering the
headlamp, or clouding of the lens.
•The metal part of the headlamp ECU becomes hot
while the headlamp is on and immediately after
it is
turned off. Do not touch it until it cools down as
it may cause burns.
ÿ To prevent car breakdowns and fires
•Make sure that the light bulb is installed firmly in the correct position. Check the wattage of
the bulb before installing it to prevent heat damage
please.
metal part