Toyota VELLFIRE 2010 Manual page 528

Machine Translated by Google
526 7-2. How to deal with emergencies
Immediately drive safely for about 5 km (at a speed of 80 km/h or less) to spread the puncture
repair liquid evenly in the tire. After driving,
remove the air release cap from the hose
of the bottle and connect the emergency
repair kit again.
Turn the compressor switch "ON" for about 5 seconds, then "OFF" to check the air pressure
If the air pressure is less than 130kPa:
1
No emergency repair is possible. Please
contact your Toyota dealer. If the air
pressure is 130 kPa or more and less
2
than the specified air pressure: go to
If the air pressure is the specified air
3
pressure (ÿ P. 554): Go to
Turn the compressor switch to "ON" and inflate to the specified air pressure, and then repeat
the test after driving about 5km.
Attach the air release cap to the hose end
of the bottle
If you do not attach the air release cap,
puncture repair fluid may leak and stain
your vehicle.
Store in the luggage room with the bottle and compressor connected
Avoid sudden braking, sudden acceleration, and sudden steering, drive carefully at 80 km/h
or less, and go to a Toyota dealer.
For tire repair or replacement, please consult your Toyota dealer.