Toyota VELLFIRE 2010 Manual page 128

Machine Translated by Google
126 3-2. How to open/close and lock the door
ÿ Operating conditions for power sliding doors
When the power sliding door main switch is ON and all the following operating conditions are
met, the doors can be opened and
closed automatically. •The sliding door is unlocked (except for closing
operation) •The fuel door is closed (passenger side power sliding
door only) •In addition to the above, when the power switch is in ON mode, the vehicle speed is
3km. It must be /h or lower and meet one of the following conditions. However, opening and
closing with the
wireless remote control is not
possible. ÿ When the shift lever is in P ÿ When
the parking brake is applied ÿ When the brake pedal is depressed
ÿ About the operation of the power sliding door
•When the power sliding door main switch is ON, it will automatically operate when the handle is operated
to the position where the buzzer sounds. The
buzzer sounds intermittently during the closing operation.
•When the power slide door main switch is OFF, it can only be opened and closed manually. •If you try to
open the passenger side power slide door automatically while the fuel door is open, the operation will be
stopped.
•If the fuel door is opened while the power slide door on the passenger side is open, the buzzer will sound and the manual operation will stop.
switch to work.
•If a person or foreign object is caught in the power sliding door while it is automatically opening and
closing, the buzzer will sound, and the operation will stop after reversing about 10 cm. When the power
sliding door is operated after stopping, it works as follows: Reverse movement:
Pull the outside
handle or press the switch on the sliding door handle Move in the opening direction: Pull the inside
handle in the open
direction or power sliding door switch
Press (OPEN side) Move
in the closing
direction: ÿ Pull the inside handle in the closing direction or power slide door switch
Press (CLOSE side)
After the entrapment prevention mechanism is activated, the power sliding door will not operate even if the power
sliding door open/close switch on the electronic key is pressed.
ÿ When reconnecting the auxiliary battery
In order for the power sliding door to operate properly, perform the initial settings as follows. - Operate the
door handle
of the sliding door and manually close it once